无线无源在线测温监控系统技术特点：

Wireless passive online temperature monitor system technical characteristics: 

1.双电源模式，功能更加完善

1. Double power supply mode, the function will be improved 

提供两种取电模式：第一种是通过触臂或母排上流过的一次电流进行感应取电；第二种是通过手持巡检仪提供的射频信号进行取电。这两种取电方式的组合提供了更加完美的功能，为设备的质量检测、系统设置、安装，巡检、软件升级等提供便利。

Provide two of their patterns: the first is through arm or on the bus through a induction electric current; The second is to provide rf signal through a checking instrument for electricity. Electricity from the two ways of combination provides a more perfect function, for quality testing of devices, system setup, installation, inspection, software upgrades, etc. 

2.超强取电性能，无工作盲点

2. Super performance, work without blind spots 

断路器触头或开关柜母排上只要有2~3A一次电流就可以让取电模块正常工作。

On the circuit breaker contacts or switchgear bus as long as there is 2 ~ 3 a can let take a current electricity module to work properly. 

3.采用喉箍式结构，安装更方便

3. The throat hoop structure, it is more convenient to install 

无源无线测温模块尺寸小，安装方便，适用于各种尺寸的触头壁和母排，可以安装在触头臂套管内侧或外侧，可以安装在母排各种位置，有更多的选择，安装更加方便快捷。

Passive wireless temperature measurement module size is small, easy installation, suitable for all kinds of size of bus and contact wall, can be installed in the casing medial or lateral contact arm, can be installed at the various locations of the bus, there are more choices, more convenient and quick installation. 

4.发射周期智能化

4. Intelligent launch cycle 

可以根据触头臂或母排上感应电流的大小自动调整发送周期，数据发送频率更智能化，大于等于1秒可以任意设定。

Can according to the contact arm or bus induced current automatically adjusts the size of the send cycle, data sending frequency more intelligent, greater than or equal to 1 second can be arbitrarily set. 

5.感应能量小，稳定性高

5. Induction low energy, high stability 

模块内部从一次电流感应到的功率从3A的0.08mW到1000A时的0.12W，由于本身感应到的功率小，不需要通过保护电路去消耗多少能量，更加稳定。

Internal modules from a current sensing power from 3 a 0.08 mW to 0.12 in 1000 - a W, because itself to the power of small, don't need to go through the protection circuit power consumption, more stable. 

6.屏蔽结构设计，抗干扰性好

6. Block structure design, anti-interference performance is good 

内部硬件设计上，增加了屏蔽罩和保护电路，可以轻松的应对群脉冲和浪涌带来的干扰，手持供电设计，设置和维护更加方便。

Internal hardware design, increased the shielding cover and protection circuit, can easily cope with group of pulse interference and surge, hand-held power supply design, setup and maintenance more convenient. 

喉箍式无源无线采用的是双电源设计，不仅可以感应取电，还可以在断电的情况下用手持巡检仪进行射频供电，可以直接对监测模块进行实时设置和软件升级，这样对于后期维护可以更加方便。

Throat hoop type passive wireless USES is double power supply design, not only can induction motor, can also in the case of power cuts with handheld inspection instrument for radio frequency (rf) power supply, can be set directly to real-time monitoring module and software upgrades, so can be more convenient for later maintenance. 

7.新合金材料应用，自产热小

7. Application of new alloy materials, produced heat is small 

无线测温模块，采用特殊的软磁合金材料，产热很小，在10000A的大电流下对监测点没有任何影响，不同于传统硅钢片，取的能量很高，发热很严重，会加重监测点的温度。

Wireless temperature measurement module, the use of special soft magnetic alloy material, heat production is very small, in 10000 a large electricity back to the monitoring does not have any effect, different from traditional silicon steel sheet, high energy, fever is very serious, will increase temperature monitoring.