| 无线测温系统组成 |
| 添加时间：2020/8/14 16:02:42 浏览次数： |
| 无线测温系统组成 Composition of wireless temperature measurement system 无线测温系统由无线温度传感器、测温通信终端（温度接收仪）、温度监测预警工作站三部分组成。 The wireless temperature measurement system consists of wireless temperature sensor, temperature measurement communication terminal (temperature receiver) and temperature monitoring and warning workstation. 无线温度传感器：测量接触点的温度。主要安装在容易发热的处。每个无线温度传感器具有唯一的ID编号，实际安装使用时记录每个传感器的安装地点，并与编号一起存入温度监测工作站计算机数据库中。传感器每隔一定时间（可以事先设定）自动发射一次监测点的温度数据，但如温度发现异常立即报警，不受发送周期限制。 Wireless temperature sensor: measure the temperature of the contact point. It is mainly installed in the place easy to heat. Each wireless temperature sensor has a unique ID number. The installation location of each sensor is recorded during actual installation and use, and stored in the computer database of temperature monitoring workstation together with the number. The sensor automatically transmits the temperature data of the monitoring point every certain time (which can be set in advance). However, if the temperature is abnormal, it will give an alarm immediately, which is not limited by the sending cycle. 无线温度接收仪(：安装在变电站站内，根据安装区域安装，负责接收各无线温度传感器（探头）测量和发送出的温度数据，并通过总线连接，把测温数据上传到管理计算机，响应管理软件命令。 Wireless temperature receiver (: installed in the substation, installed according to the installation area, responsible for receiving the temperature data measured and sent by each wireless temperature sensor (probe), and uploading the temperature measurement data to the management computer through bus connection, and responding to the command of management software. 工作站系统：无线测温客户端软件，实时显示各监测区域监测点的温度数据以及变化曲线，并进行查询分析，一旦发现温度过热、或急剧升温到设置报警温度立即报警。 Workstation system: wireless temperature measurement client software, real-time display of temperature data and change curve of monitoring points in each monitoring area, and carry out query and analysis. Once the temperature overheats or sharply rises to the set alarm temperature, the alarm will be given immediately. |
| 上一页 没有了 |
| 下一页 开关柜无线测温装置产品特点 |
Copyright © 技术支持：遨游网络